|
|
|
|
| Flower Power iBooks |
| Written by Jacob Thomason | ||||||||||||||||||||||||||||
| Thursday, 03 June 2004 | ||||||||||||||||||||||||||||
|
This mod, found at http://www.camelot.co.jp/member/taguchi/kaizoibook4.html, was translated using AltaVista's babel fish translator. This mod shows you how to put nearly any picture you want on the front of your ibook. Makes for a nice change. The 4 iBook (FlowerPower) being, until it finishes (Jul.24,2001)
So, the circumstance which exceeds one line. Already, while the fighter who was painted in the silver and the blue has been present, how originality is put out, in the point, the metallic color pearl white it tried trying, whether it should, but it had been lacking in the deciding factor which now was called one this. If is, it is not first to decide color, in order to be changed simply from after, that, when you thought whether it probably is not possible, thing of the transparency cover which is adopted in the past PowerBook 1400 series was remembered. If certainly, that you can use various textures above monochromaticity. Even the photograph is inserted. It stopped meeting with the motion of spirit and iBook top cover frame conversion plan. When the top cover is removed, the logographic part being the pressure sensitive adhesive double coated tape, it is visible that it is fixed. This being well enough powerful, trying probably to peel unreasonably, so, so it is not something which peels off. Then, while a little inserting the paper which has thickness to the opening, moving to left and right we had decided to remove the logographic part with the method little by little of keeping weakening adhesion.
In the top cover, it is installed in the kind of form where the plastic part for fixing turns inside completely, but this fixed method the both sides pressure sensitive adhesive sheet. As expected because as for this there is no even opening which inserts the paper, the seal peeling was used inevitably. In order with those of spray condition, to permeate into the pressure sensitive adhesive sheet, it blew the fact that this time you use more than usual. When it does for a while, adhesion became weak, considerably could remove the part simply, but also paint inside covering dissolved simultaneously. Because re-paint of the top cover becomes prerequisite, when there is no intention of painting, perhaps the seal peeling maneuvers the person who devised of another method is good. The paint of the top cover, melted wiped off in previous battery cover part similar and the paint reducer. It meaning that the area is wide, you use also the solvent that much mainly. Unless ventilation is done in the Ç‹ Çfl, being rather to become feeling bad, you note. Being at the point where paint peels off completely, enters into the re-paint just of the peripheral part. It covers the part which is not painted with the masking tape for the model, keeps blowing the spray paint evenly. As for this time using pure white of É^É~ÉÑÉJÉâÅ[. Concerning color you were troubled awfully, but it settled after all in the most normal white. Because PM-900C which is used for the compilation of the texture which is inserted in is to A4, the result of adjusting to the size, the edge is a little thick the Çfl. When truth wanted to shave to very limit, but there is no edge freely using printing, this size was the limit.
The material of texture using the desktop picture and the like which is attached to iBook. At the time because there are no handle ones with the model change of iMac, it tried making FlowerPower and BlueDalmatian as the commemoration. Summer to seem other than that the island south and the figure of the earth which was seen from outer space. It is thin in printing, but the opaque lord high white film was used. Being thin with the relationship which is inserted in, the material which is not transparent is desirable.
When you place on the floor, it is what, health meter we would like to see...... With being the case that it is said, presently at FlowerPower specification in operation. Furthermore, presently concerning the logographic part, because of the type Ç« ÇË, in the midst of business trip.
...... It continues. : Rubber foot after that. Because being black does not come how exactly, it tried searching another ones with Tokyu Hands.
As for buying those of 16mm diameter, with 8 entering 400 Yen ñÁ. This exact in size of the metal part. (It becomes the kind of feeling which is covered extensively.)
- It is doing with the lever, thinks the original rubber foot the Ç– ÇÂ Ç¡ to be disgusted that the cod, you lost, it came out. ...... It cannot return anymore, -. In various sense.
Write Comment |
||||||||||||||||||||||||||||
| < Prev | Next > |
|---|
|
|